The four series of gear reducers R, K, S, and F are designed and manufactured on the basis of a modular combination system. There are a lot of motor combinations, installation forms and structural schemes, and the transmission ratio is finely graded to meet different operating conditions and realize electromechanical integration.化.
The four series of gear reducers of R, K, S and F adopt the modular design principle of unit structure, which greatly reduces the types of parts and inventory.
The four series of gear reducers R, K, S and F have high transmission efficiency, low energy consumption and superior performance.
The four series of gear reducers R, K, S, and F have a ribbed high-rigidity cast iron box. The gears are made of high-quality alloy steel. The surface is carburized and hardened. The teeth are finely processed, smooth transmission, low noise, and load-bearing capacity. Large, low temperature rise and long life.
Performance
The gear is carburized and quenched with high-quality alloy steel, the tooth surface hardness is as high as 60±2hrc, and the tooth surface grinding accuracy is as high as 5-6.
The use of computer shaping technology to pre-shape the gears greatly improves the load-bearing capacity of the reducer.
From the box body to the internal gear, it adopts a completely modular structure design, which is suitable for large-scale production and flexible selection.
Standard reducer models are divided in the form of decreasing torque, which avoids power waste compared with the traditional equal ratio division.
Designed and manufactured by cad/cam to ensure the stability of quality.
Various sealing structures are used to prevent oil leakage.
Multi-directional noise reduction measures ensure the excellent low-noise performance of the reducer.
Scope of application
1. The high-speed shaft rotation is not more than 1500 rpm.
2. The circumferential speed of the gear drive is not more than 20 m/s.
3、工作环境温度为-40-45℃，如果低于0℃，启动前润滑油应预热至0℃以上。
4. The gear reducer can be used to run in both forward and reverse directions.
Use, maintenance and precautions of gear reducer
460. The reducer adopts 0# medium-duty industrial gear oil, and the working environment temperature is 40~XNUMX℃.
100. After the first 2000 hours of use, the inner cavity should be cleaned and replaced with new gear oil, and the oil should be changed every XNUMX hours thereafter.
XNUMX. When disassembling the reducer, try to avoid hammering to avoid damage to normal parts.
XNUMX. If oil leakage is found at the shaft extension or joint during use, seals such as the skeleton oil seal should be replaced in time.
